Entdecken Sie ausführliche Artikel, Tipps zur Produktverwendung und Anwendungsleitfäden für passive HF-Komponenten und Antennen. Bleiben Sie mit den neuesten Erkenntnissen von MS-TELERF zu DAS, 5G, SATCOM und HF-Technik auf dem Laufenden.
An RF dummy load is a passive termination device that absorbs RF power at a 50Ω matched impedance and dissipates it as heat. Selection comes down to three questions: Does the power rating cover the […]
RF Dummy Load Selection Guide: Engineering Decisions from 10W to 500W Mehr lesen "
In RF systems such as phased arrays, 5G base stations, and satellite communications, the Wilkinson power divider is one of the most widely used power distribution components. However, the core structure of a conventional Wilkinson
Three Practical Paths to Wilkinson Power Divider Miniaturization Mehr lesen "
100MHz (VHF band) antennas are RF radiating and receiving devices operating in the 30–300MHz frequency range. Their core engineering value lies in balancing four parameters through proper radiating element design: directivity, VSWR, power handling, and
100MHz VHF Antennas: From Electromagnetic Theory to Engineering Selection Mehr lesen "
The RF passive components used in indoor Distributed Antenna Systems (DAS) are the basic functional units that distribute, combine, couple, and filter base station RF signals according to design requirements. Their core engineering value lies
MS TELERF 500-6000MHz 4-in-4-out hybrid combiner: 500MHz to 6GHz coverage, ≥60dB isolation between input ports, and -160dBc PIM (@2×43dBm). How it works: Four cavity filters are integrated inside, each channel filters independently before combining at the
For macro base stations and large DAS systems that need to split 500W signals across 698-3700MHz, MS TELERF’s cavity splitter outperforms microstrip designs. It uses an air-dielectric cavity structure with total insertion loss ≤5.2dB (including
For L-band applications requiring one signal split precisely into eight outputs, MS TELERF’s 1280-1300MHz 8-way power splitter (MPS-1280-08-NF) delivers approximately 9.4dB total loss (including 9.0dB theoretical split loss), ≥20dB isolation, and ±0.2dB amplitude balance. Built
1280–1300 MHz 8-fach-Signalverteiler: Präzise Signalverteilung im L-Band Mehr lesen "
2 Way vs 4 Way vs 8 Way Power Divider: Differences, Insertion Loss and Applications A 2-way power divider splits one RF signal into two outputs, while 4-way and 8-way power dividers distribute one input
Evaluating RF component performance centers on five key electrical parameters: insertion loss, isolation, VSWR, amplitude balance, and phase balance. For 5G and DAS applications, a sixth critical metric—passive intermodulation (PIM)—must also be included. MS TELERF’s
MS-TELERF ist ein Direkt Hersteller (OEM/ODM), der sich auf leistungsstarke HF-Passivkomponenten mit niedrigem PIM-Wert (Passive Intermodulation) spezialisiert hat. Das Unternehmen bietet zuverlässige HF-Passivkomponenten für globale 5G-DAS-Systeme (Distributed Antenna Systems), Small Cells und kritische
Wo kann man maßgeschneiderte HF-Komponenten mit niedrigem PIM-Wert beziehen? Mehr lesen "
