Main Product Introduction
The 555-6000MHz 4-Way Power Splitter is a high-performance solution for multi-operator and multi-service wireless environments. By integrating the 4.3-10 connector standard, this splitter offers a significant upgrade over traditional N-type components, providing a smaller footprint and significantly more stable Passive Intermodulation (PIM) performance. It is a “universal” component, capable of distributing everything from low-band 5G (600MHz) to high-speed 6GHz Wi-Fi signals. Housed in a heavy-duty, corrosion-resistant enclosure, it is designed for 24/7 reliability in mission-critical DAS (Distributed Antenna Systems), neutral host networks, and high-density urban small cells.
Application Scenarios
- 5G NR & LTE Indoor DAS: Centralized signal splitting for multi-band coverage in airports, malls, and corporate campuses.
- Carrier-Grade 5G Deployment: Ideal for sites requiring the 4.3-10 interface for superior PIM management and signal integrity.
- Wi-Fi 7 Enterprise Networks: Distributing ultra-wideband signals for high-capacity wireless access point arrays.
- Neutral Host Infrastructure: A single distribution hub supporting multiple service providers across the entire sub-6GHz spectrum.
Electrical Specifications
| Parameters | Specifications |
|---|---|
| Model No. | MPS-5560-04-41F-163 |
| Frequency Range | 555 – 6000 MHz (Ultra-Broadband) |
| Output Port Number | 4-Way |
| 3rd Order PIM (@2*43dBm) | ≤ -163 dBc (Premium Low-PIM) |
| Total Input Power | 300 W |
| Insertion Loss | ≤ 0.4 dB (@ 555-2700 MHz) ≤ 0.6 dB (@ 2700-3800 MHz) ≤ 1.0 dB (@ 3800-6000 MHz) |
| Return Loss (VSWR) | ≤ 1.35 |
| Connector Type | 4.3-10 Female |
| IP Rating | IP65 (Indoor & Outdoor Waterproof) |
| Operating Temperature | -35℃ to +75℃ |
| Color | Grey (RAL 7047) |
FAQ
- Why is the 4.3-10 connector preferred for 5G?
- The 4.3-10 interface is specifically designed for 5G. It is smaller than the 7/16 DIN connector and provides much more stable Low PIM performance than the N-type connector, especially when the cables are subject to movement or vibration.
- What is the total signal loss per port for this 4-way split?
- The theoretical split loss is 6.0 dB. Combined with typical insertion loss across the 6GHz range, the total attenuation per port is approximately 6.6 dB to 7.5 dB depending on the frequency.
- Does this splitter support the 600MHz (n71) and 3.5GHz (n78) bands?
- Yes, it is fully optimized to cover the spectrum from 555MHz to 6000MHz, making it one of the most versatile splitters for all global 5G frequency allocations.
- What is the typical PIM rating for this model?
- This unit is designed for high-performance networks, typically achieving a Low PIM rating of ≤-155 dBc to ≤-161 dBc (@ 2×43 dBm), preventing interference that could slow down 5G data speeds.
- How should I treat unused output ports?
- CRITICAL: To maintain the PIM and VSWR specifications, any unused output port must be terminated with a 50-ohm Low PIM 4.3-10 dummy load. Using a standard load will compromise the PIM performance of the entire system.
Recommended products
8Way Power Splitter 617-3980MHz NEX10 Female
Power Splitter2000-8000MHz 30W 4Way Power Splitter Low VSWR
Power Splitter30W 698-6000MHz 16Way Power Splitter
Power Splitter380-3000MHz 4Way Power Splitter with SMA Female
Power Splitter
